The new EasyCut 3 QuickFit®
CUTTING SYSTEM
The new EasyCut 3 cutting system for combine harvesters with QuickFit® technology sets new standards in efficiency, comfort and durability.
Thanks to clever details such as the unique quick-change system for mower fingers and sections, EasyCut 3 is the perfect solution for optimum harvesting results.
Awarded a silver medal
Agritechnica Innovation Award 2025
Awarded a silver medal
Agritechnica Innovation Award 2025
QuickFit® Technology
Thanks to QuickFit, knife sections or guards can be changed three times faster than before. With just one tool.
QuickFit® Guard
The new V-design of the mower finger extends the cutting edge by 10% and increases the bending stiffness by 50%.
QuickFit® section
The new design of the section ensures an innovative form fit between the blade and locking plate.
Optimized components
The blade drive, blade head and blade head bearing have been optimized in terms of load capacity and service life.
When time, replacement and adjustment work become a problem
Even the best combine harvester cutterbar reaches its limits when time pressure, difficult harvesting conditions and high maintenance requirements come together.
Long downtime due to complex blade change
Until now, changing sections on the cutting system was a time-consuming and costly process.
A real disadvantage, especially in tight harvesting windows.
High wear in demanding conditions
Stones or foreign objects often lead to breakages or defects on blades and mower fingers.
Recurring adjustment work
Many systems have to be adjusted regularly. This costs time, personnel and nerves.
Maximum harvest time. Minimal downtime.
Because every minute counts during the harvest
Thanks to the QuickFit system, cutter blades and mower fingers can be replaced in a fraction of the time previously required.
Robust components for the toughest applications
Guards with enhanced break resistance, along with cutter blades featuring an innovative positive-locking connection to increase the pulling force on the cutter bar, ensure maximum stability.
Maintenance-free
In contrast to other systems for combine harvesters, Schumacher cutting systems do not require regular readjustment. This saves time and reduces maintenance to a minimum.
Easy handling – greater convenience
Only one tool is required on the top side of the system for the assembly and removal of the mower finger and section. Counter-holding below the cutter bar is not necessary.
EasyCut 3 QuickFit®
Our cutting system for combine harvesters in detail
QuickFit system for blade and mower finger
Compared to conventional systems, the QuickFit system enables the blade and mower finger to be changed three times as quickly. With just one tool, the nuts are only loosened but not completely removed. There are no loose parts, there is no need to counterhold underneath the cutter bar and unnecessary loss of time is a thing of the past. The mower finger is removed by simply pulling it out, the section is released from the system by simply tilting it down.
The new QuickFit® mower finger – faster to install, more stable in operation
The mower finger has a U-shaped opening at the rear edge. After loosening the fastening nuts, it is simply pulled out forwards. During installation, an integrated spacer keeps the mounting gap open. A wider transition from the finger tip to the base forms the new V-design and thus increases stability. The cutting edge is extended by 10%, the bending stiffness is increased by 50%, and foreign objects are better deflected. In addition, a parallel, overlapping reinforcement in the upper area ensures a high section modulus, which is particularly advantageous when using crop lifters.
Product information
Request now
The new QuickFit section Innovative positive locking of blade and locking plate
A connecting plate, the Locking Plate, is attached to both sides of the positive-locking recess in the rear edges of the new QuickFit section. This replaces the classic blade joint. This perfect form fit enables the direct transfer of tensile forces from section to section. The result: a significantly higher overall material cross-section of the knife back and blade for transferring the tensile forces.
The new weight-reduced cutterhead
The new cutter head achieves up to 300% more tensile strength thanks to the circumferential welded seam design. The top tensioner has been completely eliminated, which means a 30% reduction in weight and therefore a reduction in oscillating mass. Special fingers are no longer required, so that closed standard fingers can now also be fitted in the front area of the cutter head. Depending on the cutting system, it is therefore possible to fit additional ear lifters.
The new AxioFit cutterhead bearing with compensation function
The knife head bearing with compensation function dynamically compensates for misalignments between the cutting system and knife drive on the combine harvester cutting unit. The angles and rotational movements are taken over by different bearings, each of which is best suited to the task. The new knife head bearing minimizes both friction and wear and prevents knife breakage due to tension. In addition, the EasyConnect connection reduces the number of fastening screws from two to one. The AxioFit cutterhead bearing with compensation function is compatible with clamping ring and clamping head bearings and the matching cutterheads.
Switch NOW
to the EasyCut 3 QuickFit® CUTTING SYSTEM for combine harvester headers!
Contact us for further information.
All FACTS about EasyCut 3 QuickFit® AT A GLANCE
Reliable, even after purchase
Even after you have purchased EasyCut 3 QuickFit®, we will not leave you on your own. Spare parts are available reliably and internationally. Our service hotline and technical advice ensure that your cutting system on the combine cutterbar remains ready for use at all times.
Whether you have questions about application, maintenance or compatibility, our team will support you quickly and reliably.
Service hotline: +49 (0)2681 8009-1000
CHANGING BLADES with EasyCut 3
Frequently asked QUESTIONS about the EasyCut 3 QuickFit® cutting system
for combine harvester cutterbars
How does EasyCut 3 differ from EasyCut II?
EasyCut 3 uses the new QuickFit system for significantly faster blade and mower finger changes. The new V-geometry significantly increases the stability of the mowing finger. The innovative positive locking of the section and locking plate has a positive effect on the power flow.
Do I need special tools to change the blade?
No. All you need is a standard ratchet wrench to loosen the nuts of the cutting system. It is not necessary to hold it underneath the cutter bar. No special screws are required either. The system only requires standard fasteners.
Is EasyCut 3 compatible with existing combine harvesters?
Yes. The system has a modular design and can be adapted to common combine harvester headers. The new AxioFit knife head bearing with compensation function is also compatible with clamping ring and clamping head bearings and the respective matching knife heads.
How long does it take to change the blade compared to conventional systems?
The change can be carried out three times faster than with the previous model.
Is the cutting system for combine harvester cutterbars maintenance-free?
Yes. In contrast to many conventional cutting systems, SCH cutting systems do not require the blade guide to be readjusted.
Where can I get spare parts?
SCH spare parts are available directly from specialist agricultural machinery dealers and can be supplied reliably and internationally.